As a service to our members and woodturning friends, our newsletters are available in Adobe Acrobat ".PDF" format, which can be read with a variety of programs including Adobe Reader. To obtain a newsletter file, just click one of the links below to read it online, or to save it to your computer's hard disk drive.
(2001 - 2009)
|
Nov 2009 -- Three Winged Vessel by Fred Denke
June 2009 -- Decorative Piercing on the Cheap by Glynn Cox
January 2009 -- Turning Hollow Forms by Steve Worcester
November 2008 -- Everything you always wanted to know about turning.. But didn’t know who to ask by Larry Roberts
October 2008 -- Turning Christmas Ornaments by Brian Evans
August 2008 -- When Bowls Fly... by Craig Timmerman
July 2008 -- Segmented Kitchen Utensils by Delbert Dowdy
June 2008 -- Turning an M&M Dispenser by Johnny Tolly
May 2008 -- Building a Vacuum Chuck System” by Pete Tkacs & John Solberg a.k.a. “The Bruised Brothers"
No April 2008 Issue Available
March 2008 -- Turning and Decorating a Platter by Al Stirt
February 2008 --Making Jewelry on the Lathe by Joel Crabbe
January 2008 -- Ornamental Turning Demonstration by John Herber
November 2007 -- Turning a Snowman by Marion McDaniel
October 2007 -- Miniature Birdhouse Ornaments by Bill Meador
September 2007 -- Legs ...& Lids”by Ralph Watts
August 2007 -- Techniques & Tools for End-GrainTurning by John Horn
July 2007 -- Thread Chasing "An Humbling Experience" by Paul Coppinger
June 2007 -- Ribbon Turning by Steve Ott
May 2007 -- Road Kill Menu for Woodturners by Kevin Bassett
April 2007 -- Tips on turning eggs by Fred Denke
March 2007 -- Finishing for the Home Shop by Howard Hale
February 2007 -- Microwave Wood Drying by Dewayne Hines
January 2007 -- Turning a Covered Dish by Tom Crosby
Oct/Nov/Dec 2006 -- Small Scale Turning by Wayne Fitch
September 2006 -- Boxes, Boxes, Boxes ... by Paul Tiefel
August 2006 -- Turning Your Scraps into Wearable Art by John Horn
July 2006 -- Joel Makes a Stand by Joel Rubin
June 2006 -- It Floats Upon the Water by Chelsea Deakins
May 2006 -- Spindle Duplication ... According to Hoyle by George Hoyle
April 2006 -- Platter Turning by Larry Genender
March 2006 -- Segmented Turning by Dale Green
February 2006 -- Using Wood Scraps by Wyatt Compton
January 2006 -- One Man’s Trash Wood....Is Another’s Treasure! by Mike Jones
November 2005 -- Finishing the Bottoms of Bowls by Pleas McKee
October 2005 -- Which is Better: The Gouge or the Skew? by Fred Denke
September 2005 -- Five Suggestions for Lathe Turned Gifts by Jimmie Arledge
August 2005 -- Turning a Peppermill by John Horn
July 2005 -- Pen Turning by Jeff Carrell
June 2005 -- Multi-Axis Turning by Paul Tiefel
May 2005 -- Using Hook Tools for Hollowing End-Grain Vessels by Wayne Clowers
April 2005 -- Vessel within a vessel by Trent Bosch
March 2005 -- How to turn a gavel by Larry Hancock
February 2005 -- Design and Form by Clay Foster
January 2005 -- Empty Bowls Project by John Williams
November 2004 -- Newly learned tricks for turning Christmas ornaments andnew coloring techniques by Gary Sanders
October 2004 -- Safety and shop needs by Allan Tucker
September 2004 -- Making a Santa Claus Nutcracker by John Horn
August 2004 -- Developing patterns for unique results by Bob Matern
July 2004 -- Inside out vase by Joel Rubin
June 2004 -- Eccentric boxes by Jean-Francoise Escoulen
May 2004 -- Use of the Hoch tool and how to make your own by Tom Crosby
April 2004 -- Miniature Turnings by Steve Ott
March 2004 -- Finishing by Howard Hale
February 2004 -- Winged Bowls by Stuart Batty
No January 2004 Issue Available
November 2003 -- Simple texturing and coloring techniques to produce Southwest style pottery forms by Larry Hancock
October 2003 -- Platters by Larry Genender
September 2003 -- Exploring using the router and other tools to decoratin a turned object by Robert Brandt
August 2003 -- Carving, Piercing & Fluting by Ken Terrell
July 2003 -- “Taming the Skew” by John Horn
June 2003 -- Segmented Projects by Dale Green & Jeff Wentworth
May 2003 -- Cutting Techniques by Stacy Hager
April 2003 -- Deep Hollowing Rig by Mike Wallace
March 2003 -- Bark Edged Basic and Baloney by Larry Roberts
February 2003 -- Turning Birdhouses byRobert Lawrence
January 2003 -- New chucking techniques, split turning and table leg production by George Hoyle
December 2002 -- Christmas Banquet
November 2002 -- Sharpening: Wolverine System and the Vari-Grind by Mike Wallace , the Ellsworth grind by Fred Denke , Using a belt sander for sharpening tools by Larry Roberts, and the Stuart Batty method of freehand grinding by Larry Genender
September 2002 -- Making and using hook tools for end-grain turning by Raul Pena
August 2002 -- A refined version of his Platters demo by Larry Genender
May 2002 -- Tools of the Trade by Stacey Hager
April 2002 -- Split woodturning technique, miniatures, and his sanding system by James Johnson
March 2002 -- Turning Goblets by Jimmie Arledge
November 2001 -- Turning Spheres by Ron Grantham
October 2001 -- Turning Christmas tree ornamentsby Gary Sanders
September 2001 -- Interactive Turnings by Larry Hancock
August 2001 -- Quick and Easy Turned Toys by John Horn |